Radiator support and Fender Aprons

[henderlong]

Hey all,
I'm looking for Fender aprons and a radiator core support for a 71 f100 ranger.
Could i use the 73 style (core support and aprons)?
I'm looking online at NPD and i can only find that they sell the RH Apron. Why is this? I need both sides.

Thanks,
Dave H.

[nastys toys]

You could use a 73-79 core support and inner fenders but you will need to use a 73-79 hood and hinges as well because I forget which way it is but I think it's bump sides hood hinges bolt to the inside of the inner fenders and the dent sides bolt to the outside or other way around. You could just use the 73-79 core support and inner fenders with a 67-72 hood and hinges but you will need to reinforce the inner fenders where the hinges would be located. I had 73-79 hood, hinges, inner fenders and core support I was going to put on my 71 but found a hood and inner fenders for my truck so I didn't end up using them parts but I did use the core support from the 73-79 if your close to PA I have the inner fenders and hood still from a 73-79 I'm selling

[henderlong]

What shape are they in? Not close, but we might be able to work something out.
What about a radiator core? have a spare?
I'm looking for clean parts. I don't care if they are a repo.

Thanks,
Dave.

[nastys toys]

Are you wanting a radiator core or core support? The inner fenders are in great condition here's my Craigslist ad the pics were taken when they still had the factory paint on them since then I stripped them and primered and painted them. I forgot to update the ad only things left are the hood and inner fenders.

[henderlong]

Post a link to your CL ad. I am located in Michigan, 48178.
Yes, i also need a radiator core SUPPORT.
Thanks,
Dave

[nastys toys]

Oops forgot to post the link http://lancaster.craigslist.org/pts/3671385636.html

[henderlong]

Can you post a more recent picture, since you said that they were striped and primed. I'm looking for "time saving" pieces, so all i have to do is scuff up some primer, reprime, and paint.
What are you looking to get out of them? Shipping shouldn't be too bad. pm me.
Any info on a radiator support? I might just have to order one through NPD or LMC. I noticed that LMC is starting to go out of stock on these parts.
Thanks,
Dave.

[nastys toys]

Ill snap acouple pics the next time I get there I used them pics to show how good of condition they were before I touched them yea they were primered and I started to spray them black and runout half way through now that I recall. I might have also have a usable core support ill have to see this weekend I should be picking up a bunch of parts got to see what condition it's in.

[JANARD]

i have everything u need 909 5568229

[JANARD]

200 for core support 905568229 also i have inner fenders

[henderlong]

Janard, sandblast and prime those inner fenders and lets talk! I'm looking for something i can paint, and slap on.

[henderlong]

Ill snap acouple pics the next time I get there I used them pics to show how good of condition they were before I touched them yea they were primered and I started to spray them black and runout half way through now that I recall. I might have also have a usable core support ill have to see this weekend I should be picking up a bunch of parts got to see what condition it's in.

Any luck with the pictures?
Much appreciated!

[nastys toys]

Finally got to digging out the inner fenders in storage I painted one black and ran out of paint right after I started spraying the second fender so its mostly just primered.