Toolbox lock

[habu]

On my CS the toolbox on the passenger side, should the lock be the same as the door and ignition? If its not can it be rekeyed?

[flyboy2610]

No, they are different keys. I don't think you could re-key one because the keys are different styles. I could be wrong, though.

[habu]

Well shoot. Was hoping that they'd be the same. When I got the truck I only got the key for the door/ignition and nothing for the toolbox and I can't seem to find a replacement on any of the popular sites (Dennis carpenter, lmc, npd...etc).
How do I get a key for that lock then ?

[72BahamaBlue]

I had a locksmith cut keys for mine, cost about $25. Stamped on the keys are what might be the type number, Y11.

[mrollings53]

I had a locksmith cut keys for mine, cost about $25. Stamped on the keys are what might be the type number, Y11.

You may be on to something there. My toolbox key also has Y11 on it.

[guerra]

The toolbox key I had made at the locksmith also has y11 on it..

[habu]

I had forgotten about this post.

Thanks for the tips guys I'll probably go get this done at a locksmith in the next week or so. I have so many things "in process" for my build that I'm having difficulty to prioritize them. It's the little things like this that I'll need to not ignore.

[DCrusher]

Y11 is kinda the model number of that keyway.. But yes a locksmith will knock it out for you easy..

I had forgotten about this post.

Thanks for the tips guys I'll probably go get this done at a locksmith in the next week or so. I have so many things "in process" for my build that I'm having difficulty to prioritize them. It's the little things like this that I'll need to not ignore.