Need Some body parts

Buckethead03 · Post by **Buckethead03** » Tue Apr 24, 2012 1:51 pm

I am in need of both a driver and passenger side fender that is rust and dent free, a driver side door that is rust free and a short bed in the same condition. Surface rust is fine, i just don't want anything with big holes in it. I would like to find something local to me or could drive a reasonable distance to pick it up. I am in North Carolina.

Ripsnorter · Post by **Ripsnorter** » Sat Apr 28, 2012 1:19 pm

If you can't find any I know where there are some that are rust free here. I think I might even have some too.

You could check on shipping on a greyhound bus, I think that's not too unreasonable.

Hope you find some local though.

mrsnicks · Post by **mrsnicks** » Wed May 02, 2012 7:26 am

If you want rust-free you may have to take a trip to Arizona or buy fiberglass pieces.

http://usbody.com/

Patrick

Bigblock514 · Post by **Bigblock514** » Thu May 03, 2012 11:39 pm

I got a clean driver's side fender.
It has a small pin hole on lower leg. I can fix or you can. No such thing as rust free on something this old.
Will post pics on request.

mrsnicks · Post by **mrsnicks** » Fri May 04, 2012 5:47 am

Where in NC are you located? I live in Cameron, NC and have a parts truck you could buy whole or buy pieces off of. I'll try to find my photobucket link to the pictures.

Patrick

Buckethead03 · Post by **Buckethead03** » Fri May 04, 2012 8:09 am

mrsnicks wrote:Where in NC are you located? I live in Cameron, NC and have a parts truck you could buy whole or buy pieces off of. I'll try to find my photobucket link to the pictures.

Patrick

I live in the Statesville area. I am interested in any good hole free fenders, doors, or shortbed. Let me know what you got. Thanks

hot_roder09 · Post by **hot_roder09** » Tue May 08, 2012 7:42 pm

too bad if your willing to come to texas i have a great rust free shortbed i would sell youfor 200 with a good tailgate too

mrsnicks · Post by **mrsnicks** » Tue May 08, 2012 8:07 pm

http://s91.photobucket.com/albums/k319/ ... ed%20pics/

Here are a few pics I have had in photobucket for a while. I can try to take more if interested.

Patrick

Buckethead03 · Post by **Buckethead03** » Thu May 10, 2012 9:46 am

mrsnicks wrote:http://s91.photobucket.com/albums/k319/ ... ed%20pics/

Here are a few pics I have had in photobucket for a while. I can try to take more if interested.

Patrick

how much for the bed? how do the fenders look in the bottom corners near the door jamb? thanks

mrsnicks · Post by **mrsnicks** » Thu May 10, 2012 10:29 am

I'll get some pictures of the fenders shortly, I was thinking $250.00 for the bed. That's what I usually see them going for. There is however no tailgate. I'd also be willing to sell the whole thing for $500.00. There is no title.

Patrick

Buckethead03 · Post by **Buckethead03** » Thu May 10, 2012 8:01 pm

mrsnicks wrote:I'll get some pictures of the fenders shortly, I was thinking $250.00 for the bed. That's what I usually see them going for. There is however no tailgate. I'd also be willing to sell the whole thing for $500.00. There is no title.

Patrick

im interested. get me some more pics if you can. does the truck have an engine or transmission?

The FORDification.com Forums

Need Some body parts

Need Some body parts

Re: Need Some body parts

Re: Need Some body parts

Re: Need Some body parts

Re: Need Some body parts

Re: Need Some body parts

Re: Need Some body parts

Re: Need Some body parts

Re: Need Some body parts

Re: Need Some body parts

Re: Need Some body parts