Are the quarter panels the same on the 1967 - 1972 4wd and 2wd?
-Big John-
1967-1972 quarter panels
Moderator: FORDification
-
- New Member
- Posts: 26
- Joined: Sat Oct 15, 2005 11:05 am
- Location: Texas, Weatherford
-
- 100% FORDified!
- Posts: 22329
- Joined: Sun Aug 28, 2005 8:17 pm
- Location: Kansas, Ottawa
- Contact:
- FORDification
- Site & Forum Admin
- Posts: 8050
- Joined: Sun Jul 11, 2004 12:52 am
- Location: Kansas, Wellsville
- Contact:
re: 1967-1972 quarter panels
Yes...the boxes are the same. The only body parts which differ between 2WD and 4WD that I'm aware of is the left-side inner fenderwell. I thought I recall someone once mentioning here that they thought the radiator support was a little different, but I'm not sure. And then as mentioned above is the difference in bed end caps between the '67-'69 and the '70-'72 trucks, since the later versions had running lights in the bump of the endcap.
____| \__
-O-----O- Keith
'67 F-100 2WD SWB ~ '69 F-100 4WD SWB w/7" chop ~ 1975 F-250 Ranger XLT Supercab Camper Special
![Image](http://www.fordification.com/board/mysig.jpg)
![Image](http://www.fordification.com/images/forum/supercab-avatar1.jpg)
![Image](http://www.fordification.com/images/forum/bug.gif)
My '67 restoration video
-> Posting and you! <-a MUST watch for all!!
-O-----O- Keith
'67 F-100 2WD SWB ~ '69 F-100 4WD SWB w/7" chop ~ 1975 F-250 Ranger XLT Supercab Camper Special
![Image](http://www.fordification.com/board/mysig.jpg)
![Image](http://www.fordification.com/images/forum/supercab-avatar1.jpg)
![Image](http://www.fordification.com/images/forum/bug.gif)
My '67 restoration video
-> Posting and you! <-a MUST watch for all!!