problems with "c" bushings

[big_ol_country_boy]

i recently purchased some urethane bushings for the front end of my 69 f100 4wd. well everything was goin awsum until i realized i couldnt get my "c" bushings around the axel i was still about an inch and a half from being able to screw the bolts in if neone has ne advice it would be greatly apprectiated

[68half/step4x4]

I changed mine back in '88. Was a long time ago, but don't recall any problems. Got them from James Duff. I'd check with the manufacture. I think there is a front and back because of the offset degree angles. That was on a '72.

[big_ol_country_boy]

i fixed the problem like a big dummy i was putting the wrong size bolts in there i got bigger bolts and it slid right on thanx for your advice it was greatly appreciated

steve