Column/box replacement
Moderator: FORDification
-
Chromepro
- New Member
- Posts: 10
- Joined: Fri Dec 09, 2005 8:51 am
- Location: California, San Francisco (East Bay)
Column/box replacement
I'm replacing the Bendix setup on my 68 Ranger 2x4 360, with a Saginaw box and 79 column. Any ideas on crossover years for pitman arm, engine-side firewall column bracket (for P/S), and engine perch/stand? I've found 73 parts on the net at a bone yard, but since I can't see them, wonder if they would work as 68-72 do?
-
72hiboy4x4
- Blue Oval Fanatic
- Posts: 978
- Joined: Sat Jan 01, 2005 8:53 pm
- Location: As far away as I can be from Wa state, without crossing the Mississippi
- Contact:
First off, Welcome to the site! post up on the welcome mat and be officially welcomed!
second, read this for the answer to all your questions.
http://www.fordification.com/powersteering.htm
then whe you have more ??, the guys here will be able to help you out even more!
second, read this for the answer to all your questions.
http://www.fordification.com/powersteering.htm
then whe you have more ??, the guys here will be able to help you out even more!
In life many men take the path of righteousness, some take the path many others follow (G.M. owners, for example), some take a more arduous path, some a simpler path. I, sir, took the PSYCO-PATH!!