Power Steering/Brakes From a Dentside
Moderator: FORDification
- evan_flatt69
- Blue Oval Fan
- Posts: 513
- Joined: Mon Mar 21, 2011 7:53 pm
- Location: Portland, Tennessee
Power Steering/Brakes From a Dentside
Been seeing a 1973-1977 F-100 fro sale on a highway near my house. And today I decided to stop by and take a look and see if it had any parts I could use. It was in parts already! The engine had been stripped down to the block and it hade power steering and brakes, which is what I'm looking for. I was wondering which parts are interchangeable as far as the power brakes and steering. I'd like to get a new master cylinder and booster from the auto parts store and the only thing I need is the brackets right? I'm not sure about anything on the power steering other than the steering column. Id like to have my existing one shortened or lengthened if possible.
1969 F-100 Short Bed Custom Cab 390
1985 BMW 635CSi
1985 BMW 635CSi
-
- 100% FORDified!
- Posts: 22329
- Joined: Sun Aug 28, 2005 8:17 pm
- Location: Kansas, Ottawa
- Contact:
Re: Power Steering/Brakes From a Dentside
almost everything except the outer body parts the dahs and the rear of the frame. but it can have a bump bed put on it with a bracket made onto the frame to bolt the bump bed on the rear of the frame. if it has a booster. it will have the brackets on it.
- evan_flatt69
- Blue Oval Fan
- Posts: 513
- Joined: Mon Mar 21, 2011 7:53 pm
- Location: Portland, Tennessee
Re: Power Steering/Brakes From a Dentside
So I can take the steering box, pump, and everything besides the column and it's a direct fix with my '69?
1969 F-100 Short Bed Custom Cab 390
1985 BMW 635CSi
1985 BMW 635CSi