I'm very familiar with Mustang suspension, that's why I'm choosing those spindles. Here's a link to some mods I did to a 73 Mach 1. I converted everything to a full roller (ball bearing) suspension.
73 Mach 1 Suspension pics
I-Beam replacement idea
Moderator: FORDification
-
Skitzo
- New Member
- Posts: 33
- Joined: Tue Sep 07, 2010 12:06 am
- Location: Riverside, CA
I-Beam replacement idea
Hey guys, just throwin this idea out there to see if anyone has any suggestions or can see if this wont work. I have a 72 F100 and I want to bag the front without removing the engine. I'm thinking of fabbing up some A-arms to replace the I-beams and using some 65-73 Mustang disc brake spindles so I would still be able to use the stock steering box and linkage as well as keep the engine mounts and crossmember. What do you think? Is there anything I'm missing? I want to lay the frame, it's a rat project so beauty is not my goal,
I'm very familiar with Mustang suspension, that's why I'm choosing those spindles. Here's a link to some mods I did to a 73 Mach 1. I converted everything to a full roller (ball bearing) suspension.
73 Mach 1 Suspension pics
I'm very familiar with Mustang suspension, that's why I'm choosing those spindles. Here's a link to some mods I did to a 73 Mach 1. I converted everything to a full roller (ball bearing) suspension.
73 Mach 1 Suspension pics
-
marz68
- Blue Oval Guru
- Posts: 1387
- Joined: Sat Dec 03, 2005 2:25 am
- Location: California, Northridge
- Contact:
Re: I-Beam replacement idea
Sounds like what I'm working on.
I would sure like to see how you setup your a arms.
I would sure like to see how you setup your a arms.
