CV IFS vs stock i beams.
Moderator: FORDification
-
RTG_RACING
- Preferred User
- Posts: 406
- Joined: Thu Apr 05, 2007 8:35 am
- Location: Indiana
CV IFS vs stock i beams.
Is the CV front the same width as the stock I beams?
-
flyboy71
- Blue Oval Guru
- Posts: 1012
- Joined: Sat Mar 21, 2009 9:30 pm
- Location: Boiling Springs, PA
Re: CV IFS vs stock i beams.
Its about 65" or so so its wider. You can use offset wheels to minimize it. Its still within the fenders though. Heres my install thread. Theres a few pics that kinda show the width. http://www.fordification.com/forum/view ... =5&t=47610
-Jeff
1971 F-100 240 straight six, 3 on the tree (parted out)
1972 F-100 302 auto trans, pwr steering, pwr brakes (under construction)
"Things are more like they are now than they ever were before" Dwight Eisenhower
1971 F-100 240 straight six, 3 on the tree (parted out)
1972 F-100 302 auto trans, pwr steering, pwr brakes (under construction)
"Things are more like they are now than they ever were before" Dwight Eisenhower
-
JG F100
- Preferred User
- Posts: 280
- Joined: Thu Mar 13, 2008 6:31 am
- Location: Houston
Re: CV IFS vs stock i beams.
CV front end is 67.5" wide. I cant remember how wide the ibeams were.
72 F100 - SWB conversion w/05 crown vic IFS, 8.8 rear w/disc, 20s, 360FE w/overdrive
Project Page: http://www.fordification.com/forum/view ... 22&t=37897
Project Page: http://www.fordification.com/forum/view ... 22&t=37897