67-72 2wd f250 with front discs, willing to measure

ChrisB · Post by **ChrisB** » Fri Mar 26, 2010 11:18 pm

I'm looking for the 4 bolt pattern dimensions for mounting the caliper bracket to the spindle. Plus or minus .250" shouldn't be a problem on accuracy for now....

flyboy2610 · Post by **flyboy2610** » Sat Mar 27, 2010 6:12 pm

Side to side looks to be 2.750".
Top to bottom looks to be 3.750", the top end being the end with the caliper mounting ears on it.
This is center to center, as close as I can measure it.

ChrisB · Post by **ChrisB** » Sun Mar 28, 2010 1:34 am

Thanks, do you have one or two piston calipers?

flyboy2610 · Post by **flyboy2610** » Thu Apr 01, 2010 8:34 am

Two piston calipers.

Orange Beezy · Post by **Orange Beezy** » Fri Apr 02, 2010 11:59 pm

Do you have a problem with rattling with your front brakes?

flyboy2610 wrote:Two piston calipers.

flyboy2610 · Post by **flyboy2610** » Sat Apr 03, 2010 2:53 pm

I haven't got them installed yet, I just measured the bracket. Hopefully, I will get them installed this summer.
We'll see.

The FORDification.com Forums

67-72 2wd f250 with front discs, willing to measure

67-72 2wd f250 with front discs, willing to measure

Re: 67-72 2wd f250 with front discs, willing to measure

Re: 67-72 2wd f250 with front discs, willing to measure

Re: 67-72 2wd f250 with front discs, willing to measure

Re: 67-72 2wd f250 with front discs, willing to measure

Re: 67-72 2wd f250 with front discs, willing to measure