brake and steering question

Suspension, steering, brakes, wheels & tires

Moderator: FORDification

Post Reply
J LEE
New Member
New Member
Posts: 13
Joined: Tue Jan 26, 2010 3:50 pm
Location: Monroe, NC

brake and steering question

Post by J LEE »

If using DJM drop beams on a 68 f100 will the power disc front brake setup and power steering setup from a dentside f250 bolt up or do I need to keep looking?
fordman
100% FORDified!
100% FORDified!
Posts: 22329
Joined: Sun Aug 28, 2005 8:17 pm
Location: Kansas, Ottawa
Contact:

Re: brake and steering question

Post by fordman »

that would be determined by the king pin size on the djm beams. and the spindles you are going to use. if the beams coem with spindles then you will have to ask them which disc brake rotors fit thier spindles.
J LEE
New Member
New Member
Posts: 13
Joined: Tue Jan 26, 2010 3:50 pm
Location: Monroe, NC

Re: brake and steering question

Post by J LEE »

If I'm not mistaken theirs dont come with spindles or king pins anymore, probably because of the different sizes. with that being said the swap is possible correct? Also i would like to use a flaming river or Ididit tilt steering column when I change to the power steering setup and put the shifter for the C6 on the floor has anyone here done this? Any advice on this swap? Thanks

Jeff
Post Reply