steering column firewall collar

69rangerf100 · Post by **69rangerf100** » Mon Jan 18, 2010 8:26 am

does anyone know where i can get this part

fordman · Post by **fordman** » Mon Jan 18, 2010 12:48 pm

the rubber seal? the vendors have that. the plate that holds the rubber seal? maybe soemone has a used one they would sell. same with the outer firewall bracket.

69rangerf100 · Post by **69rangerf100** » Mon Jan 18, 2010 1:17 pm

i have the outer bracket for my power steering, are the inside brackets the same in the 67-72 i have a 73 column that still has the inside bracket that is in good shape would that work?

fordman · Post by **fordman** » Tue Jan 19, 2010 2:50 am

inside brackets are different shape but they bolt on the same. the one in the picture is a manual steering bracket. becuase it is kind of square looking. the power steering bracket has a hump on top. the hump doesnt hurt anything or do anything i dont think. kieth has soem info abotu those brackets someplace. i will see if i can find the info. i think you can use it with no problems.

fordman · Post by **fordman** » Tue Jan 19, 2010 2:53 am

here is the picture of the hump i was talking about. the one on the right has the hump on it. near the bottom of the picture. you can see it doesnt do anything really. and it wont get in the way if you use it. http://www.fordification.com/tech/images/colshort02.jpg

69rangerf100 · Post by **69rangerf100** » Tue Jan 19, 2010 8:21 am

the auto column that i have is for a power steering column and i have the engine bay PS bracket as well. so i just need to get the boot then thanks Craig for the help

The FORDification.com Forums

steering column firewall collar

steering column firewall collar

Re: steering column firewall collar

Re: steering column firewall collar

Re: steering column firewall collar

Re: steering column firewall collar

Re: steering column firewall collar