REAR LEAF SPRING QUESTION
Moderator: FORDification
- 57fordf100
- New Member
- Posts: 105
- Joined: Sat Jun 27, 2009 2:46 pm
- Location: BELL GARDENS,CA
REAR LEAF SPRING QUESTION
hey guys i know its not a engine question but here it goes i have a 1957 ford f100 i flipped the rear end and got about 5 inches lower i wanna go about 3 more inches lower iv heard talk about taking out some leafs from the bundle but i wasent to sure about it what do you guys think would i be safe driving around with 2 leafs taken out of each side im not planning on carrying real heavy loads any help would be great thanks guys
FORD IS LIFE OIL N GAS IS MY BLOOD
-
- 100% FORDified!
- Posts: 22329
- Joined: Sun Aug 28, 2005 8:17 pm
- Location: Kansas, Ottawa
- Contact:
Re: REAR LEAF SPRING QUESTION
as long as it doesnt let the rearend bottom out onto the frame. you should be ok. two leafs is alot of spinrg to removme. i might try only one and see what that would do first.
-
- Preferred User
- Posts: 286
- Joined: Fri Dec 29, 2006 12:21 pm
- Location: Texas, Abilene
Re: REAR LEAF SPRING QUESTION
Flip the shackles man, flip the shackles. sorry, dont know if that would apply I just like the way it sounds.

'67 352 3spd 3.25 9" Custom Cab
'92 Mercury Cougar
http://www.fordification.com/galleries/ ... ?pos=-3222
- BobbyFord
- 100% FORDified!
- Posts: 5383
- Joined: Sun Feb 04, 2007 9:52 am
- Location: Chatsworth, California
Re: REAR LEAF SPRING QUESTION
And.............get some shims and re-adjust the pinion angle.