bumps with lowered altitude!! (lots of great custom bumps!!)

[marz68]

Amen to that I would pay for his services in a heart beat the work he does is simply amazing.

Thanks,
The brackets would be fairly easy to make if I only had a truck with dropped beams.

[69NVF100]

Amen to that I would pay for his services in a heart beat the work he does is simply amazing.

Thanks,
The brackets would be fairly easy to make if I only had a truck with dropped beams.

Well if you ever get the opportunity I would buy some from you for sure.

[69NVF100]

i had a little photoshop work done by a nice member at Slick60's and its already got me putting a parts list together for a bag set-up. the project will take most of the winter im sure but you all know i'll post progress regularly. i'll be doing the front first.






http://i321.photobucket.com/albums/nn39 ... 8ford2.jpg

Hey td that looks good! It looks like you can achieve that drop with the mustang 2 front suspension and 2" dropped spindles and bagged just look at my truck from back in the days.
Original frame mustang 2,bagged,2" dropped spindles and 4 link rear with the bags ever the axle on 20" wheels.
http://i66.photobucket.com/albums/h257/ ... 0_1099.jpg
http://i66.photobucket.com/albums/h257/ ... 0_1091.jpg
http://i66.photobucket.com/albums/h257/ ... 0_0959.jpg
http://i66.photobucket.com/albums/h257/ ... 0_1083.jpg
http://i66.photobucket.com/albums/h257/ ... 0_1085.jpg
http://i66.photobucket.com/albums/h257/ ... 2_0267.jpg
http://i66.photobucket.com/albums/h257/ ... 0_1086.jpg
Down all the way.
http://i66.photobucket.com/albums/h257/ ... titled.jpg
Up all the way.
http://i66.photobucket.com/albums/h257/ ... 6666-1.jpg

Marz, were do I find that 4 link or one that is close to the one in your photo? Is it bolt in or weld in also is it difficult to install any info would be great.

[td]

69nvf100,

marz just helped me with this same ?

here's some links he sent me. both places have what you need.

http://www.ridetech.com/catalog/Paralle ... -78-1.html

http://www.suicidedoors.com/catalog/4-l ... components

[td]

shipping would run his price up to the point were he wouldn't have as much of a bargain as you might think.

it calculated mine at $70 so thats $560 i can't clearly remeber the amount i paid summit but it was real close to the same.

summit price to my door is $581 so he is beating them by $20

[70shortwide]

yea it quoted me just under 50. i couldnt find what summit would want for shipping. free? i dont know, ive never ordered from summit

[td]

yes its free. they listed $570 and they told me on the phone a minute ago there was a $11 handling fee.

[70shortwide]

I know on some parts you can only gt a warranty on them if you buy them from a seller approved thru the manufacturer. summit may be the better place to get them even if its an extra $50 or so.

[td]

i thought i would post this since i looked it up to call and get some info on cost.

DJM dream beam 65-79 f100/f150 part # DJM-DB3004-3

[marz68]

i had a little photoshop work done by a nice member at Slick60's and its already got me putting a parts list together for a bag set-up. the project will take most of the winter im sure but you all know i'll post progress regularly. i'll be doing the front first.

http://i321.photobucket.com/albums/nn39 ... 8ford2.jpg

Hey td that looks good! It looks like you can achieve that drop with the mustang 2 front suspension and 2" dropped spindles and bagged just look at my truck from back in the days.
Original frame mustang 2,bagged,2" dropped spindles and 4 link rear with the bags ever the axle on 20" wheels.
http://i66.photobucket.com/albums/h257/ ... 0_1099.jpg
http://i66.photobucket.com/albums/h257/ ... 0_1091.jpg
http://i66.photobucket.com/albums/h257/ ... 0_0959.jpg
http://i66.photobucket.com/albums/h257/ ... 0_1083.jpg
http://i66.photobucket.com/albums/h257/ ... 0_1085.jpg
http://i66.photobucket.com/albums/h257/ ... 2_0267.jpg
http://i66.photobucket.com/albums/h257/ ... 0_1086.jpg
Down all the way.
http://i66.photobucket.com/albums/h257/ ... titled.jpg
Up all the way.
http://i66.photobucket.com/albums/h257/ ... 6666-1.jpg

Marz, were do I find that 4 link or one that is close to the one in your photo? Is it bolt in or weld in also is it difficult to install any info would be great.

I got mine from Total cost involved, it was a universal kit.
The front brackets are bolt on but the rear axle brackets are weld on.
Also check out the links I sent to td.

[marz68]

I found this one from when I was doing the chop top. Roadster!!

[td]

just to keep the thread on course here's a very sharp lowered bump.
i believe he is or at least was a member here and i'm thinking i remember seeing this truck on the bay.
so either he had it on there or he bought it there, but none the less its gorgeous.

[69NVF100]

Marz and TD thanks for all the help, I will research the info you guys gave me.

[FordTruck]

Here's a dent I saw online

[KF100TK]

just to keep the thread on course here's a very sharp lowered bump.
i believe he is or at least was a member here and i'm thinking i remember seeing this truck on the bay.
so either he had it on there or he bought it there, but none the less its gorgeous.

http://i321.photobucket.com/albums/nn39 ... e_shot.jpg

This almost looks like mine