410 pistons

Engine, ignition, fuel, cooling, exhaust

Moderators: Ranchero50, DuckRyder

Post Reply
Doug Comer
Blue Oval Fan
Blue Oval Fan
Posts: 649
Joined: Tue Dec 13, 2005 12:38 am
Location: California, Sonora

410 pistons

Post by Doug Comer »

Does anyone know where to find forged pistons for a 410. Thanks in advance. Doug
1967 f100 4x4
1970 f250 4x4
Top
User avatar
basketcase0302
100% FORDified!
100% FORDified!
Posts: 6805
Joined: Thu Jan 26, 2006 7:11 am
Location: Hawthorne, Florida

re: 410 pistons

Post by basketcase0302 »

Doug,

Did you try Performance Unlimited?
Or these guys:
http://www.fordracingparts.com/parts/pa ... Field=9287

Basketcase
Jeff
http://www.fordification.com/forum/view ... 22&t=46251
SOLD-71 F-350 dually flatbed, 302 / .030 over V-8 with a "baby"C-6, B & M truckshifter, Dana70/4.11 ratio, intermittent wipers, tilt steering, full LED lighting on the flat bed, and no stereo yet (this way I can hear the rattles to diagnose)! SOLD!
Many Ford bumps / one 76' EB / and several dents through the years.
A lot of "oddball" Ford parts collected from working on them for 34 years now!
2008 Ford Escape 4 x 4
Top
User avatar
convincor
100% FORDified!
100% FORDified!
Posts: 1511
Joined: Wed Sep 12, 2007 5:05 am
Location: Connecticut

re: 410 pistons

Post by convincor »

NAPA has them listed for- 1967 >> Mercury >> Marquis >> 6.7 L 410 CID V8
part# SEP W381P add20,30,40 for oversize. $24.99 each

FYI, if you look up pistons for a 69 Ford "Truck" 390, there the same part.
These have a 1.66" compression height.
The "car" 390 piston has a different part # and has a 1.78" compression height.

PartsAmerica also has them as a set- http://www.partsamerica.com/productdeta ... ber=TC1831
68 Custom Cab Shorty, 390, C6, 9"-3.50:1 Currie T/L
"Still Plays With Trucks"
http://s101.photobucket.com/albums/m41/convincor/F100/
Top
User avatar
DuckRyder
Moderator
Moderator
Posts: 4926
Joined: Mon Jul 19, 2004 3:04 pm
Location: Scruffy City
Contact:
Contact DuckRyder

re: 410 pistons

Post by DuckRyder »

Ross makes them.

Survival has Probe, SRP and Diamond (custom)

http://www.survivalmotorsports.com/FEpistons.html

I am sure Keith Craft can also get them.
Robert
1972 F100 Ranger XLT (445/C6/9” 3.50 Truetrac)

"An unarmed man can only flee from evil, and evil is not overcome by fleeing from it." -- Jeff Cooper
Top
Doug Comer
Blue Oval Fan
Blue Oval Fan
Posts: 649
Joined: Tue Dec 13, 2005 12:38 am
Location: California, Sonora

re: 410 pistons

Post by Doug Comer »

After posting I found the Ross pistons. Thanks for all your help. Has anyone had experience with Ross pistons? Doug
1967 f100 4x4
1970 f250 4x4
Top
Doug Comer
Blue Oval Fan
Blue Oval Fan
Posts: 649
Joined: Tue Dec 13, 2005 12:38 am
Location: California, Sonora

re: 410 pistons

Post by Doug Comer »

I have a 390 block .030 over, a 428 crank and 428 rods. What piston should I use? My engine builder is kinda giving me a hard time :x Doug
1967 f100 4x4
1970 f250 4x4
Top
User avatar
convincor
100% FORDified!
100% FORDified!
Posts: 1511
Joined: Wed Sep 12, 2007 5:05 am
Location: Connecticut

re: 410 pistons

Post by convincor »

.030 over 410.
Why's he giving you a hard time, because he don't know WTF he's doing??
68 Custom Cab Shorty, 390, C6, 9"-3.50:1 Currie T/L
"Still Plays With Trucks"
http://s101.photobucket.com/albums/m41/convincor/F100/
Top
Post Reply

Return to “Engine”