Hello from NC
Moderator: FORDification
-
CurseOf67
- New Member
- Posts: 8
- Joined: Mon Apr 14, 2008 6:48 am
- Location: Fayetteville
Hello from NC
Actually I am currently in Afghanistan (again) but I will be heading home in a few weeks. I have been looking at this site for a while now. It is the best site out there as far as I am concerned. You guys really know these trucks inside and out. As you can see from my username I bought a 1967 F250, manual everything about 2 years ago. Needless to say my baby girl will be 1 y/o in July. Actually we were trying to have a baby so I don't know if the curse really applies but she did get pregnant after I bought the truck. I have not done too much to it since I bought it. I added delayed wipers (thanks to this site), new headers, and tires and rims. Did I mention
-
TheEskimo
- Blue Oval Fanatic
- Posts: 932
- Joined: Thu Feb 02, 2006 10:11 pm
- Location: California, Clearlake
- Contact:
-
JWW
- Blue Oval Fanatic
- Posts: 793
- Joined: Wed Apr 11, 2007 7:57 pm
- Location: Tennessee
re: Hello from NC
Thanks for your service. Congrats on the baby, and also welcome to the site. When you get a chance post some pics of your truck.
JWW
1967 F100 Ranger, Auto, 240ci
2004 F150 Crew Cab
My project: http://www.fordification.com/forum/view ... &sk=t&sd=a
1967 F100 Ranger, Auto, 240ci
2004 F150 Crew Cab
My project: http://www.fordification.com/forum/view ... &sk=t&sd=a
-
1970FordTK
- 100% FORDified!
- Posts: 2831
- Joined: Tue Mar 13, 2007 9:37 pm
- Location: North Carolina
re: Hello from NC
Stay safe and make sure that the bump is baby seat compatible. After all it would be nice to have both your babies with you at all times. 
-
RedneckTexan
- Blue Oval Guru
- Posts: 1102
- Joined: Tue Apr 03, 2007 6:58 pm
- Location: The backwoods of TEJAS!
-
craftsman
- Preferred User
- Posts: 400
- Joined: Mon Jun 25, 2007 4:28 pm
- Location: Tennessee, Knoxville
re: Hello from NC
to the site. Stay safe 
-
69F110
- Blue Oval Guru
- Posts: 1024
- Joined: Mon Jul 19, 2004 1:07 pm
- Location: Bunkie, Louisiana
- Contact:
-
427blackpearl
- Preferred User
- Posts: 462
- Joined: Tue Nov 27, 2007 10:29 pm
- Location: Tennessee, Knoxville
re: Hello from NC
another welcome from tennessee, thanks for stopping by
-
AlleyCat
- Blue Oval Guru
- Posts: 1283
- Joined: Sat May 12, 2007 8:28 pm
- Location: Pennsylvania, Pittsburgh
re: Hello from NC
Hi and welcome from Pennsylvania.Stay safe. 
Another 67
Another 67
Clay
72 F100 4x2 Custom,289, C4 " Slow Ride "
70 F250 4x2 Ranger XLT , 360, C6 "B52 - IV"
96 F150 4x2 XL, 300, E4OD, daily driver
" Professional Wrecker Operators - We Pull for America "
72 F100 4x2 Custom,289, C4 " Slow Ride "
70 F250 4x2 Ranger XLT , 360, C6 "B52 - IV"
96 F150 4x2 XL, 300, E4OD, daily driver
" Professional Wrecker Operators - We Pull for America "
-
old_mare
- New Member
- Posts: 122
- Joined: Sat Jan 20, 2007 2:16 am
- Location: Maple Valley, WA
- Contact:
re: Hello from NC
Montana welcomes you!!! And once again, THANK YOU for your service to our Country!
-JT-
"I'm a man, and I can change, if I have to, I guess." -Red Green
I'd rather push a Ford than drive a Chevy!
1930 Tudor : 1930 Pickup : 1969 F250 Custom
I'd rather push a Ford than drive a Chevy!
1930 Tudor : 1930 Pickup : 1969 F250 Custom
-
basketcase0302
- 100% FORDified!
- Posts: 6805
- Joined: Thu Jan 26, 2006 7:11 am
- Location: Hawthorne, Florida
re: Hello from NC
Curse,
from Bartow, Florida.
Thank you for your service.
Basketcase
from Bartow, Florida.Thank you for your service.
Basketcase
Jeff
http://www.fordification.com/forum/view ... 22&t=46251
SOLD-71 F-350 dually flatbed, 302 / .030 over V-8 with a "baby"C-6, B & M truckshifter, Dana70/4.11 ratio, intermittent wipers, tilt steering, full LED lighting on the flat bed, and no stereo yet (this way I can hear the rattles to diagnose)! SOLD!
Many Ford bumps / one 76' EB / and several dents through the years.
A lot of "oddball" Ford parts collected from working on them for 34 years now!
2008 Ford Escape 4 x 4
http://www.fordification.com/forum/view ... 22&t=46251
SOLD-71 F-350 dually flatbed, 302 / .030 over V-8 with a "baby"C-6, B & M truckshifter, Dana70/4.11 ratio, intermittent wipers, tilt steering, full LED lighting on the flat bed, and no stereo yet (this way I can hear the rattles to diagnose)! SOLD!
Many Ford bumps / one 76' EB / and several dents through the years.
A lot of "oddball" Ford parts collected from working on them for 34 years now!
2008 Ford Escape 4 x 4
-
F100builder
- Blue Oval Guru
- Posts: 1304
- Joined: Thu Jan 10, 2008 6:55 pm
- Location: Idaho, Nampa
re: Hello from NC
Welcome, congratulations, and stay safe!
Patrick
'56 F100; Must.II IFS, 351W bored & stroked to 395c.i. 470hp/483ft-lbs., AOD, 4-link coilover 9" w/ 3.89's
'69 F100; 390, C6, Dana 60 w/ 4.10's
'70 F100; 'new' and latest project soon to have a built 390/C6 and 3.50 gears
To see more of my F100's: http://www.cardomain.com/id/lowfat56
'56 F100; Must.II IFS, 351W bored & stroked to 395c.i. 470hp/483ft-lbs., AOD, 4-link coilover 9" w/ 3.89's
'69 F100; 390, C6, Dana 60 w/ 4.10's
'70 F100; 'new' and latest project soon to have a built 390/C6 and 3.50 gears
To see more of my F100's: http://www.cardomain.com/id/lowfat56
-
wt4speed#2
- Blue Oval Guru
- Posts: 1064
- Joined: Fri Mar 25, 2005 9:21 pm
- Location: Texas, Ft. Worth
-
socal72
- New Member
- Posts: 15
- Joined: Mon Apr 07, 2008 10:29 am
re: Hello from NC
Welcome from So Cal and thank you for your service.
-
67RED
- Preferred User
- Posts: 484
- Joined: Thu Feb 03, 2005 1:13 am
- Location: pickens county, Liberty
- Contact: