question about lower front shock mount

kevs250 · Post by **kevs250** » Wed Apr 02, 2008 11:54 pm

You guys think I can pry the rivets off with a chisle and hammer?
Im talking about the shock mount mounted to the radius arm, and I need one fast. I installed a shock mount from a later model ford and the holes dont line up
my friend and I welded the mount on several times but the weld doesnt mend the two metals.

fordman · Post by **fordman** » Thu Apr 03, 2008 12:18 am

the hard part about it will be the angles to get to the rivets. cutting them off with a chisel will be enough if it wasnt for the angles. but it can be done i think. are you sure you got the shock mount on there right and from the same side of the donor truck.?

Post by **FORDification** » Thu Apr 03, 2008 1:15 am

There are several NOS shock mounts listed on E-bay at the moment:

http://cgi.ebay.com/ebaymotors/NOS-1965 ... enameZWD1V
http://cgi.ebay.com/ebaymotors/NOS-FORD ... enameZWDVW
http://cgi.ebay.com/ebaymotors/NOS-FORD ... enameZWDVW

The FORDification.com Forums

question about lower front shock mount

question about lower front shock mount

re: question about lower front shock mount