por-15 retailers?

[1971ford]

is there anywhere to get por-15 from besides the site?

napa, kragen and ACE, all dont have it.

[FORDification]

I doubt you'll find it at any of the chain stores...it's not exactly a fast-moving item from their shelves, not enough to warrant them having some in stock.

[1971ford]

allright ill order some from their site right now

thanks

[Brett6269]

Keep us posted 71 on how you made out with it!! was thinking about trying it myself on frame.. has anyone used it on thier trucks on here...

[OldRedFord]

Im looking to use it on the complete underside of my F100 also.

I also have part of the front frame, engine bay and front beams painted with a mix of etching primer in spots top coated with $1 satin black paint from wally-world to compare.

You can search on the POR-15 site for retailers near you.

[FORDification]

Keep us posted 71 on how you made out with it!! was thinking about trying it myself on frame.. has anyone used it on thier trucks on here...

I've used the heck out of it on mine. Here's a few links to check out:

http://www.fordification.com/my67-p43.htm
http://www.fordification.com/my67-p46.htm
http://www.fordification.com/my67-p47.htm
http://www.fordification.com/my67-p48.htm
http://www.fordification.com/my67-p49.htm

[peanutman]

Try any auto paint store in your area if you have one. they should carry all por-15 products.

[72stepside]

Keep us posted 71 on how you made out with it!! was thinking about trying it myself on frame.. has anyone used it on thier trucks on here...

I've done part of mine. More to come.

Pics here...

http://www.fordification.com/forum/view ... &&start=45

[1970FordTK]

Every thing you see in my photos that was painted metal has had POR-15 put on it. My truck bed is currently waiting for me to finish brushing all the places you can't shoot with a paint gun with it. I'm one quart shy of 2 gallons of the stuff and I think I'll have enough to finish out. I ordered all of it from the website. A quart of the stuff goes a long way, but there is alot of metal on these trucks when you do both sides of a piece and the inside (doors, cab and hood) from the ground up. Just the long bed part top and bottom is a lot of surface area. Have I stated that I hate rust yet, or is it obvious by the fact I've basicly dipped all the truck in POR-15. One thing I will stress, do what the directions say to do from start to finish. Just my . When I get the next roll of film done, I'll post the updates. Sorry for being Old School when it comes to the photo deal.

http://www.fordification.com/galleries/ ... ?album=485

[1971ford]

You can search on the POR-15 site for retailers near you.

i cant find the searchy thingy