Spring question
Moderator: FORDification
-
- New Member
- Posts: 47
- Joined: Fri Aug 17, 2007 10:55 am
- Location: Oklahoma, Norman
Spring question
I am rebuilding my 69' and just wonder if I should repalce the spring in front or not. A little back ground on the truck: It sat from 1985 til now. has a 390 and I have never driven it to know anything about the ride.
1969 F-100 SHORTY W/390 IN PROCESS OF REBUILD
- AlleyCat
- Blue Oval Guru
- Posts: 1283
- Joined: Sat May 12, 2007 8:28 pm
- Location: Pennsylvania, Pittsburgh
re: Spring question
If the ride height is okay and it holds alignment your springs are probably okay.
Clay
72 F100 4x2 Custom,289, C4 " Slow Ride "
70 F250 4x2 Ranger XLT , 360, C6 "B52 - IV"
96 F150 4x2 XL, 300, E4OD, daily driver
" Professional Wrecker Operators - We Pull for America "
72 F100 4x2 Custom,289, C4 " Slow Ride "
70 F250 4x2 Ranger XLT , 360, C6 "B52 - IV"
96 F150 4x2 XL, 300, E4OD, daily driver
" Professional Wrecker Operators - We Pull for America "
- 390Nut
- Blue Oval Guru
- Posts: 1052
- Joined: Sat Oct 16, 2004 1:23 pm
- Location: Fife, WA
re: Spring question

Give it a ride and test it out, see how it works. Chances are your bushings will be dried out badly, so I would grease up the tie-rods and king pins before you try driving it (if you are not replacing them)
Paul

`69 F100 390 4spd driver
http://www.fordification.com/galleries/ ... ?cat=10251
Dura-Spark II Conversion info at:
http://home.comcast.net/~390nut/Dura-SparkII.htm
Pipes71 did once say, "bumps and bikes.. what a great combo!"

`69 F100 390 4spd driver
http://www.fordification.com/galleries/ ... ?cat=10251
Dura-Spark II Conversion info at:
http://home.comcast.net/~390nut/Dura-SparkII.htm
Pipes71 did once say, "bumps and bikes.. what a great combo!"
