power vs manual steering column
Moderator: FORDification
- kilog55
- Preferred User
- Posts: 399
- Joined: Sun Feb 10, 2008 1:07 pm
- Location: Lenoxville, Pennsyltucky
ahh so its just the bottoms that are different
1968 F250 Ranger 2wd 472ci TH400 Caddy powered.
1979 F250 Ranger 4X4 400ci T18
anyone need a 60x24x24 flatbed semi toolbox?
my gallery - http://www.fordification.com/galleries/ ... ?cat=10437
1979 F250 Ranger 4X4 400ci T18
anyone need a 60x24x24 flatbed semi toolbox?
my gallery - http://www.fordification.com/galleries/ ... ?cat=10437
-
- 100% FORDified!
- Posts: 22329
- Joined: Sun Aug 28, 2005 8:17 pm
- Location: Kansas, Ottawa
- Contact:
ok that is what i thought. the difference is from the mountiing bracket down to the bottom of the shaft. also look at the mounting bracket differences. the power bracket is larger as well as the dentside columns i have also have the same larger bracket. the manual columns i have have the smaller bracket on it. kieth do you have a three speed column difference for the power vs manual.. the two 3 spd column i have are actually backwards than the ones in the pic. my short 3 spd column has the small bracket and the longer 3spd column has tha larger bracket. but it has the power floor boot on it. the shorter column has the manual boot on it.