sealing seams

jirikj · Post by **jirikj** » Tue Jan 29, 2008 2:56 pm

I have a 68 and am down to bare metal and am wondering what seam sealer you recomend and do you use it on all seams and sand it down flush

fordman · Post by **fordman** » Tue Jan 29, 2008 3:18 pm

i think its a 3m product for the seams that have been cleaned out.

My427stang · Post by **My427stang** » Tue Jan 29, 2008 5:03 pm

3M Fast n Firm on the body seam on a bump bed

http://solutions9.3m.com/wps/portal/3M/ ... H0RT5G3Fbl

I will tape above and below and then run a tiny bead down the groove.

Then I use a small tool, like a popsicle stick to drag a uniform bead.

Then pull the tape off and let it dry.

They say it adheres to bare metal, but I dont recommend it. Prime it well, let the primer dry then seal

jirikj · Post by **jirikj** » Wed Jan 30, 2008 2:10 pm

thanks I am new to the body work stuff so thank you