MustangSteve signing in...

MustangSteve · Post by **MustangSteve** » Mon Oct 22, 2007 5:01 pm

Found the site, read the 67 SWB buildup, looking forward to learning alot here. I have been a Mustang "expert" and forum host (google on FYIFORD) for years, but I have alot to learn about trucks. I also am looking forward to using the PARTS WANTED and FOR SALE forums to round up whatever I need. And I bet some of you also own a Mustang or two, so maybe I can help you out as well.
So far, I have a LWB 68 Custom Cab (360 w/ AC) that I bought from the original owner for $200 and a $2,000 67 SWB (240-6) plain jane. I plan to cut the frames of both trucks behind the cab and stick the SWB rear frame and bed on the Cusatom Cab truck, and vice-versa. I will then keep the SWB truck since the cab and front end is in perfect shape.
Unless anyone in the Dallas, TX are has a SWB frame they want to get rid of!

flyboy2610 · Post by **flyboy2610** » Mon Oct 22, 2007 5:14 pm

Welcome aboard!
Why not simply swap cabs and engines? It would probably be easier, and everything will fit just fine.

1970FordTK · Post by **1970FordTK** » Mon Oct 22, 2007 5:36 pm

Welcome to the site from North Carolina.

basketcase0302 · Post by **basketcase0302** » Mon Oct 22, 2007 5:48 pm

MustangSteve,

from Florida!

Since nobody else did it...

Just kiddin' man. Cool deal on the one truck, (can't buy a clear title for 200.00

Basketcase

MustangSteve · Post by **MustangSteve** » Mon Oct 22, 2007 6:47 pm

I was going to switch cabs, but the SWB has bent frame horns up front. Must have been hit lightly from the side. Straightened but the other one is perfect. No rust, no dings, no errors!

wt4speed#2 · Post by **wt4speed#2** » Mon Oct 22, 2007 6:54 pm

Welcome from the west side .

69F110 · Post by **69F110** » Mon Oct 22, 2007 7:04 pm

MustangSteve,

Welcome to the forums and the site. We're glad you're here.

AlleyCat · Post by **AlleyCat** » Mon Oct 22, 2007 7:57 pm

Hi and welcome from Pennsylvania.

Lots of nice folks and good info here.

Enjoy

TheEskimo · Post by **TheEskimo** » Sat Oct 27, 2007 4:36 am

Welcome to the site

MAK · Post by **MAK** » Sat Oct 27, 2007 8:41 am

MustangSteve wrote:Found the site, read the 67 SWB buildup, looking forward to learning alot here. I have been a Mustang "expert" and forum host (google on FYIFORD) for years, but I have alot to learn about trucks.

I've lurked on your site for years and have gotten some great info and advice related to my 68 Cougar. Your site and Keith's here are two of my favorites and have the most helpful members on the web.

Pipes71 · Post by **Pipes71** » Sat Oct 27, 2007 9:06 am

Welcome from NJ. I had the same prob with my frame horns..was lucky enough to find a frame already sandblasted and painted for 110 bucks..they are out there if ya look

and good to see another mustanger

390Nut · Post by **390Nut** » Sat Oct 27, 2007 3:33 pm

I KNEW your name looked familiar!!!

I was planning on emailing you in the next month or so, but considering I already have an extra set of pedals...

For the rest of you guys, you might seriously check this out. It doesn't get ANY better than this:

http://www.mustangsteve.com/clutchbearings.html

Thunderfoot · Post by **Thunderfoot** » Sun Oct 28, 2007 1:22 am

From Idaho

Nice, another Mustang guy

there are a few of us around here

71 LONG BED · Post by **71 LONG BED** » Sun Oct 28, 2007 7:27 am

from Jersey.

foghorn · Post by **foghorn** » Sun Oct 28, 2007 10:37 am

Well let me be the first Okie to say and that

Foggy

The FORDification.com Forums

MustangSteve signing in...

MustangSteve signing in...

re: MustangSteve signing in...

re: MustangSteve signing in...

re: MustangSteve signing in...

re: MustangSteve signing in...

Re: MustangSteve signing in...

re: MustangSteve signing in...

re: MustangSteve signing in...

re: MustangSteve signing in...

re: MustangSteve signing in...

re: MustangSteve signing in...