flatbed
Moderator: FORDification
- carnuck
- New Member
- Posts: 187
- Joined: Sun Aug 26, 2007 10:43 pm
- Location: Lynnwood, WA
flatbed
Not new to forums, but I am sort of new here (I've been jumping in on some posts)
here's a back corner view of my rig (currently getting a 400 installed. Need some nice weather and better health to finish the job)
here's a back corner view of my rig (currently getting a 400 installed. Need some nice weather and better health to finish the job)
You do not have the required permissions to view the files attached to this post.
- 1970FordTK
- 100% FORDified!
- Posts: 2831
- Joined: Tue Mar 13, 2007 9:37 pm
- Location: North Carolina
re: flatbed
Welcome aboard.....sorta. Truck looks a good thing to work with, hope you have luck gettting the motor in.
- carnuck
- New Member
- Posts: 187
- Joined: Sun Aug 26, 2007 10:43 pm
- Location: Lynnwood, WA
re: flatbed
I just need weather and better physical conditions to finish it (pic was taken before we set the motor in) I need to slide the C6 back and drop the 400 onto the mounts, then slide the trans ahead again.
My son was helping me, but had to go back to work in Canada before we got finished.
My son was helping me, but had to go back to work in Canada before we got finished.
- FLATBEDFORD
- 100% FORDified!
- Posts: 1818
- Joined: Sat Feb 18, 2006 1:34 pm
- Location: New York, Crugers
- Contact:
Welcome from NY. Flatbeds are cool!
Steve
1970 F350 DRW Factory 9' Platform/Stake, 360, T18.
Passed on to new care taker July, 2013
My Photo Gallery
http://s115.photobucket.com/albums/n298/flatbedford/
1970 F350 DRW Factory 9' Platform/Stake, 360, T18.
Passed on to new care taker July, 2013
My Photo Gallery
http://s115.photobucket.com/albums/n298/flatbedford/
- RedneckTexan
- Blue Oval Guru
- Posts: 1102
- Joined: Tue Apr 03, 2007 6:58 pm
- Location: The backwoods of TEJAS!
re: flatbed
Howdy from TEXAS!
- AlleyCat
- Blue Oval Guru
- Posts: 1283
- Joined: Sat May 12, 2007 8:28 pm
- Location: Pennsylvania, Pittsburgh
re: flatbed
Welcome from Pennsylvania.
Clay
72 F100 4x2 Custom,289, C4 " Slow Ride "
70 F250 4x2 Ranger XLT , 360, C6 "B52 - IV"
96 F150 4x2 XL, 300, E4OD, daily driver
" Professional Wrecker Operators - We Pull for America "
72 F100 4x2 Custom,289, C4 " Slow Ride "
70 F250 4x2 Ranger XLT , 360, C6 "B52 - IV"
96 F150 4x2 XL, 300, E4OD, daily driver
" Professional Wrecker Operators - We Pull for America "
-
- Preferred User
- Posts: 256
- Joined: Thu Jan 25, 2007 7:27 pm
- Location: Fayetteville N.C. (Ohio Born)
- Contact:
re: flatbed
Welcome to the site
[quote="MOST OF ALL, pray about it. If God doesn't want you to go, he will make it clear.[/quote]
1967 F-100 Longbed (project truck) For sale $1200 http://www.fordification.com/galleries/ ... ?album=710
http://www.fordification.com/galleries/ ... ?album=726
1990 Blazer (offroad toy) 7 in. lift, 37 in goodyear MTR's
2000 Ford Focus (DD/commuter car) ABOUT TO BECOME TARGET PRACTICE!
2005 GMC 2500HD Ext. Cab Longbed (Towrig for the blazer)
2006 Kaufman 20ft steel deck car hauler (The only way the Blazer sees the road)
1967 F-100 Longbed (project truck) For sale $1200 http://www.fordification.com/galleries/ ... ?album=710
http://www.fordification.com/galleries/ ... ?album=726
1990 Blazer (offroad toy) 7 in. lift, 37 in goodyear MTR's
2000 Ford Focus (DD/commuter car) ABOUT TO BECOME TARGET PRACTICE!
2005 GMC 2500HD Ext. Cab Longbed (Towrig for the blazer)
2006 Kaufman 20ft steel deck car hauler (The only way the Blazer sees the road)
- carnuck
- New Member
- Posts: 187
- Joined: Sun Aug 26, 2007 10:43 pm
- Location: Lynnwood, WA
re: flatbed
Mine will get worked pretty hard till I get finished building my house.
- customcrewcab
- Blue Oval Fanatic
- Posts: 830
- Joined: Wed Feb 02, 2005 6:43 pm
- Location: Queen Creek Arizona
- Contact:
re: flatbed
welcome!
http://www.fordification.com/galleries/ ... ?cat=10106
if theres a new way, i'll be the first in line. it better work this time
1970 crewcab 393w afr heads, 6 speed, turbocharged, 6 piston calipers 13" rotors on all 4 corners
if theres a new way, i'll be the first in line. it better work this time
1970 crewcab 393w afr heads, 6 speed, turbocharged, 6 piston calipers 13" rotors on all 4 corners
- carnuck
- New Member
- Posts: 187
- Joined: Sun Aug 26, 2007 10:43 pm
- Location: Lynnwood, WA
re: flatbed
I picked up a dumptruck today for parts, so my F350 will become a dump truck (unless I can salvage the IH, which I don't hold much hope for. The 6.9 diesel has well over 500,000 miles and quit with a thud)
- FLATBEDFORD
- 100% FORDified!
- Posts: 1818
- Joined: Sat Feb 18, 2006 1:34 pm
- Location: New York, Crugers
- Contact:
I'm getting a dumptruck for parts too.
Problem is, I think I'm gonna fix and keep it instead of putting the hoist under my flatbed.
Problem is, I think I'm gonna fix and keep it instead of putting the hoist under my flatbed.
Steve
1970 F350 DRW Factory 9' Platform/Stake, 360, T18.
Passed on to new care taker July, 2013
My Photo Gallery
http://s115.photobucket.com/albums/n298/flatbedford/
1970 F350 DRW Factory 9' Platform/Stake, 360, T18.
Passed on to new care taker July, 2013
My Photo Gallery
http://s115.photobucket.com/albums/n298/flatbedford/
- 71 LONG BED
- 100% FORDified!
- Posts: 1588
- Joined: Wed Jun 14, 2006 7:28 am
- Location: Hamburg, NJ
- carnuck
- New Member
- Posts: 187
- Joined: Sun Aug 26, 2007 10:43 pm
- Location: Lynnwood, WA
re: flatbed
Found the problem with the IH. It wasn't diesel, but the tank filler said "diesel fuel" so that's what they put in there. 345 gas with 5 speed O/D (Rockwell?) 5 ton with 2 speed rear axle. 17 foot bed and only 17,000 miles on it (used only on the farm)
Guess I'll fix it and use it for now, but The Wife says I have to chose between it and the Ford due to space limitations (hers, not mine) Guess which I'll keep and which I'll sell?
Guess I'll fix it and use it for now, but The Wife says I have to chose between it and the Ford due to space limitations (hers, not mine) Guess which I'll keep and which I'll sell?
- jbrown414
- New Member
- Posts: 86
- Joined: Wed Aug 09, 2006 10:10 am
- Location: Texas, Fort Worth
re: flatbed
Welcome from Texas! That's look like it will be an interresting project.
- 69F110
- Blue Oval Guru
- Posts: 1024
- Joined: Mon Jul 19, 2004 1:07 pm
- Location: Bunkie, Louisiana
- Contact: