Mystery MC no pushrod retainer?
Moderator: FORDification
-
oldschoolrods
- Preferred User
- Posts: 326
- Joined: Tue Aug 10, 2004 11:06 pm
- Location: Lancaster, Pennsylvania
Mystery MC no pushrod retainer?
I had spoken to keith about this a while back and hadn't got around to posting it. For my powerbrakes I cannot find a pushrod retainer clip anywhere, I have removed the snap ring on the back of the MC. Here are some pics. Any help would be REALLY appreciated. Thanks -pat
You do not have the required permissions to view the files attached to this post.
1969 Ford F250 Custom Cab 360/C6 - currently under de-construction
-
oldschoolrods
- Preferred User
- Posts: 326
- Joined: Tue Aug 10, 2004 11:06 pm
- Location: Lancaster, Pennsylvania
re: Mystery MC no pushrod retainer?
a few more
[/img]
[/img]1969 Ford F250 Custom Cab 360/C6 - currently under de-construction
-
68F250
- Blue Oval Guru
- Posts: 1174
- Joined: Thu Jul 22, 2004 3:26 pm
- Location: California, Brea
re: Mystery MC no pushrod retainer?
Most pushrods don't have a retainer clip, the rod from the booster just shoves into the mc.
Barry
"Are you gonna make it all 220?"
"Yeah 220, 221, whatever it takes."
"Are you gonna make it all 220?"
"Yeah 220, 221, whatever it takes."
-
oldschoolrods
- Preferred User
- Posts: 326
- Joined: Tue Aug 10, 2004 11:06 pm
- Location: Lancaster, Pennsylvania
re: Mystery MC no pushrod retainer?
So i can just get rid of all that crap and just shove my booster in?
1969 Ford F250 Custom Cab 360/C6 - currently under de-construction
-
68F250
- Blue Oval Guru
- Posts: 1174
- Joined: Thu Jul 22, 2004 3:26 pm
- Location: California, Brea
re: Mystery MC no pushrod retainer?
I'm not sure what all that crap is you're referring to. 
Barry
"Are you gonna make it all 220?"
"Yeah 220, 221, whatever it takes."
"Are you gonna make it all 220?"
"Yeah 220, 221, whatever it takes."
-
68F250
- Blue Oval Guru
- Posts: 1174
- Joined: Thu Jul 22, 2004 3:26 pm
- Location: California, Brea
re: Mystery MC no pushrod retainer?
Wait, I see what's going on. You're going from manual to power. The manual pushrod has the retaining clip attached to the pushrod, just pull it out of the mc. It will take some force, don't fall on your butt! I'd reassemble the mc with the snap ring and stick the mc in a vice, then start pulling on the pushrod, it WILL come out.
Barry
"Are you gonna make it all 220?"
"Yeah 220, 221, whatever it takes."
"Are you gonna make it all 220?"
"Yeah 220, 221, whatever it takes."