trim tool
Moderator: FORDification
-
fitzwell
- Blue Oval Fanatic
- Posts: 779
- Joined: Wed May 10, 2006 2:16 pm
- Location: East of a rock, west of a hard place
trim tool
looking for the tool used to remove the chrome trim around the drip rail. Seems as though Lisle made one at one time, but no luck so far....anybody got an idea???
As a metter of fact, i AM trying to keep up with the Jones'
Driving like Parnelli, Drinkin' like George
-------------------------------------------------------
Driving like Parnelli, Drinkin' like George
-------------------------------------------------------
-
kknip
- Preferred User
- Posts: 377
- Joined: Tue Aug 15, 2006 5:19 pm
- Location: North Carolina, Stanfield
re: trim tool
Church Key 
"bottle opener"
"bottle opener"Soitenly! Oh,a wiseguy!
You knucklehead!
65 Mustang
72 F250 Camper Special
You knucklehead!
65 Mustang
72 F250 Camper Special
-
FORDification
- Site & Forum Admin
- Posts: 8050
- Joined: Sun Jul 11, 2004 12:52 am
- Location: Kansas, Wellsville
- Contact:
re: trim tool
Put a couple wraps of masking tape around the end of it to prevent scratching the trim.____| \__
-O-----O- Keith
'67 F-100 2WD SWB ~ '69 F-100 4WD SWB w/7" chop ~ 1975 F-250 Ranger XLT Supercab Camper Special
My '67 restoration video
-> Posting and you! <-a MUST watch for all!!
-O-----O- Keith
'67 F-100 2WD SWB ~ '69 F-100 4WD SWB w/7" chop ~ 1975 F-250 Ranger XLT Supercab Camper Special
My '67 restoration video
-> Posting and you! <-a MUST watch for all!!
-
foghorn
- Blue Oval Fanatic
- Posts: 889
- Joined: Thu Jul 20, 2006 4:29 am
- Location: Oklahoma, Wagoner
- Contact:
re: trim tool
buy one of these sets and use the smallest one gently coaxing it off a little at a time from the bottom. Thats what i use. Mine also has a slot i cut into it just for removing door rubbers that are set in place with the little punch in clips.
http://www.harborfreight.com/cpi/ctaf/d ... umber=1654
Foggy
http://www.harborfreight.com/cpi/ctaf/d ... umber=1654
Foggy
Work is for people that dont know how to fish