Newbie from Phoenix, Az

tonsoffun1974 · Post by **tonsoffun1974** » Thu Mar 22, 2007 12:20 am

Just saying hey!, I've recently aquired my 1972 ford f-250 camper special for my daily driver. Its got a 360, C-6, and a Dana 60 w/ 4.10. I think those will be 3.55's soon. If I can do this right I'm going to try to attach some pics, but I'm not much of a computer guy.

Heavenlyfire · Post by **Heavenlyfire** » Thu Mar 22, 2007 12:45 am

neighbor. Nice looking project there.

RebelRider · Post by **RebelRider** » Thu Mar 22, 2007 2:40 am

Hey tonsoffun and welcome from Missouri!
Good lookin project.

What have you got planned for her?

69F110 · Post by **69F110** » Thu Mar 22, 2007 4:03 am

tonsoffun,

Welcome! You are in the right place man! That joker is looking good. The pics are a little dark, but it looks like primer or chalk black...either way, it looks good. I've had several chalk red F100's...

67RED · Post by **67RED** » Thu Mar 22, 2007 4:38 am

71 LONG BED · Post by **71 LONG BED** » Thu Mar 22, 2007 5:30 am

Glad you made it over here. Don't be shy, jump right in.

Hows the new ride? Looks like you made a good trade.

kknip · Post by **kknip** » Thu Mar 22, 2007 5:47 am

Welcome from North Carolina!

dduude · Post by **dduude** » Thu Mar 22, 2007 6:22 am

from Florida

........Dude

jbanks · Post by **jbanks** » Thu Mar 22, 2007 11:12 am

from Texas!!

tonsoffun1974 · Post by **tonsoffun1974** » Thu Mar 22, 2007 4:18 pm

Thanks for all the welcomes. As for plans I don't Know yet, I've got a couple other coal in the fire right know also. This is actually my daily driver. I need to get the gears in the rear changed or I'm gonna spend all my play money on gas. I'd like to put a mildly built engine with a o/d tranny in it by next spring. Being a woodworker by trade, I'm gonna get started on some trick door panels, and dash inserts maybe a couple of months out on those. I'll take some photos when I start. The bodys the last thing on the list, someone rattle canned it black, and out here in Arizona no worries with rust. That, and its a factory a/c truck, and with 120 degree summers I have to have my priorities straight.

As far as a good trade, I think I got the clean end of the stick this time. It leaks oil like mad, but I've been tracking down a bunch of loose bolts that are causing some of them. Thanks for telling me about this sight, its wealth of knowledge. There seems to be a forum topic, or a tech article about every question I've thought to ask so far.

flyboy2610 · Post by **flyboy2610** » Thu Mar 22, 2007 5:31 pm

Welcome aboard!

mytmatt · Post by **mytmatt** » Thu Mar 22, 2007 6:43 pm

Hello and another Texas welcome to you!

cathynkeith · Post by **cathynkeith** » Thu Mar 22, 2007 8:42 pm

Welcome

ratfink · Post by **ratfink** » Thu Mar 22, 2007 9:39 pm

Welcome from aanother desert rat.
Ratfink

gmcjimmy88 · Post by **gmcjimmy88** » Fri Mar 23, 2007 1:57 am

Welcome to the site. I hope you enjoy this place as much as I have.

The FORDification.com Forums

Newbie from Phoenix, Az

Newbie from Phoenix, Az

re: Newbie from Phoenix, Az

re: Newbie from Phoenix, Az

re: Newbie from Phoenix, Az

re: Newbie from Phoenix, Az

re: Newbie from Phoenix, Az

re: Newbie from Phoenix, Az

re: Newbie from Phoenix, Az

re: Newbie from Phoenix, Az

re: Newbie from Phoenix, Az

re: Newbie from Phoenix, Az

re: Newbie from Phoenix, Az

re: Newbie from Phoenix, Az