Anybody used POR Glisten PC?

69rangerman · Post by **69rangerman** » Tue Sep 26, 2006 9:27 pm

I've been messin around with the mouldings, taking the anodization off with Keiths lye trick and polishing. Yesterday after 3Ming a piece I hit it with some 000 steel wool and got this real nice satin finish that hid 90% of the nicks etc and looked cool (to me) to boot.

ANYhoo...I'm picking up some glisten pc from por tomorrow as it is formulated for applying over metals of all types/finishes and won't flake or yellow. Thought I'd ask if anybody has used it before I use it.

Thanks

michaelbrainard · Post by **michaelbrainard** » Wed Sep 27, 2006 8:14 am

i have read about the product and also have wanted to give it a shot. ( I am still trying to locate some freaking LYE to try that trick...grrrrrrrrr )....

keep us updated....I am anxious to see how it turns out. Going to spray it?

69rangerman · Post by **69rangerman** » Wed Sep 27, 2006 9:11 am

Well I thought I was going to try it this weekend but after an email to POR I found out I have to get 2 other products. Here's the email response from POR:

Subject: RE: Glisten pc question
Date: Sep 26, 2006 1:46 PM
You should clean with Marine Clean 10 parts water one part Marine Clean
and rinse well with water. Then apply our AP120 metal prep and rinse
off with water after only one minute. When completely dry you would
apply two coats of our Glisten PC. Glisten PC comes in a semi-gloss
finish too.

Further questions call or email

View our products online at www.por15.com
Por15

I'll photobucket some pics when I try it.

flyboy2610 · Post by **flyboy2610** » Wed Sep 27, 2006 7:49 pm

That's standard for POR products, clean with Marine Clean and then use their metal prep solution.

Post by **FORDification** » Wed Sep 27, 2006 9:36 pm

Neither are that expensive, and if you're gonna do it, do it right the first time. Definitely share some pics when you have something to show.

69rangerman · Post by **69rangerman** » Wed Sep 27, 2006 10:14 pm

Yeah, I was relieved to hear the prices on the metal ready and prep...the glisten and hardener set me on my can. 50 bucks! Maybe there's a decoder ring or gold plated action figure inside.

Tom

FormerMarine1981 · Post by **FormerMarine1981** » Wed Feb 21, 2007 9:20 pm

Anything ever happen with this? I would like to see the pics if so.

Big D's 69 · Post by **Big D's 69** » Wed Feb 21, 2007 10:05 pm

Yeah I would like to know what the results were with this.

trukcrazy · Post by **trukcrazy** » Wed Feb 21, 2007 10:23 pm

Big D's 69 wrote:Yeah I would like to know what the results were with this.

Me too, me too!

Big D's 69 · Post by **Big D's 69** » Thu Feb 22, 2007 8:38 am

trukcrazy wrote:
Big D's 69 wrote:Yeah I would like to know what the results were with this.
Me too, me too!

SmartA$$

trukcrazy · Post by **trukcrazy** » Thu Feb 22, 2007 9:04 am

Big D's 69 wrote:
trukcrazy wrote:
Big D's 69 wrote:Yeah I would like to know what the results were with this.
Me too, me too!
SmartA$$

Hey, I never claimed to be smart

but I would like to know how this turned out. How about it 69rangerman?

Big D's 69 · Post by **Big D's 69** » Thu Feb 22, 2007 9:52 am

trukcrazy wrote:
Big D's 69 wrote:
trukcrazy wrote: Me too, me too!
SmartA$$
Hey, I never claimed to be smart but I would like to know how this turned out. How about it 69rangerman?

FormerMarine1981 · Post by **FormerMarine1981** » Thu Feb 22, 2007 8:26 pm

I don't think anyone is behind the wheel. If no one answers by Monday I'll pm an ask.

69rangerman · Post by **69rangerman** » Thu Feb 22, 2007 10:14 pm

Sorry guys, pretty bad week for the family.

Well here's the short story, I ordered the glisten PC went to pick it up and they didn't have the prep stuff so I told them to call me when it was in. Left the parking lot and that's when the engine went. Never got a chance to work on the trim.

That was October! I'll be trying the Glisten out in a few weeks after things calm down a bit. I'll post back on this topic when I do.

Thanks.

hardtailjohn · Post by **hardtailjohn** » Thu Feb 22, 2007 11:53 pm

Check out a product called Evershield at www.aircraftfinishing.com I've used it and it's awesome... it sounds expensive at first, but when you look at how much coverage you get, it's not bad at all.
JH

The FORDification.com Forums

Anybody used POR Glisten PC?

Anybody used POR Glisten PC?

re: Anybody used POR Glisten PC?

re: Anybody used POR Glisten PC?

re: Anybody used POR Glisten PC?

re: Anybody used POR Glisten PC?