My Driver side door pins are getting fairly sloppy. What I'm wondering is if the pins and bushings are hard to replace on our trucks. I know they're recessed in the jam. I just don't want to take the door off to find That I have to get new hinges all together. Ideally I can go to the parts store get the right size bushings and pins. Line the door and striker back up and be done. Any info before I tear it apart would be appreciated.
Charles
Hinge Pins
Moderator: FORDification
-
Dropped 68
- New Member
- Posts: 147
- Joined: Fri Aug 04, 2006 12:18 pm
- Location: Kansas, Wichita
-
jzjames
- 100% FORDified!
- Posts: 1785
- Joined: Sun Jan 09, 2005 2:59 pm
- Location: Washington, Windy Point
re: Hinge Pins
Yes the part you need in the "Help!" section items is Door pin kit #38402.
Its not hard, Id take the door off to do it, if you think you can handle it.
Also, make sure your door pins didnt wear completely through the bushings and then oblong the hole in the hinge itself.
Its not hard, Id take the door off to do it, if you think you can handle it.
Also, make sure your door pins didnt wear completely through the bushings and then oblong the hole in the hinge itself.
-
Dropped 68
- New Member
- Posts: 147
- Joined: Fri Aug 04, 2006 12:18 pm
- Location: Kansas, Wichita
re: Hinge Pins
Awesome, thanks james, that was exactly the info I needed.
Charles
http://www.fordification.com/galleries/ ... ?cat=10451
Bulid, Destroy, Rebuild!
Charles
http://www.fordification.com/galleries/ ... ?cat=10451
Bulid, Destroy, Rebuild!