73+ Inner fenders and rad support in my 67

[FORDification]

Not without some major metalwork. The hood latch on the '73-'79 trucks is in the hood, wheras it's at the top of the radiator support on ours.

[Leadfoot]

remember you need to zap holes for the grill mount on the rad support


& all you need to line the hood is ta long gate the hole 3/4 of a inch


and to take the fender and door gap out level the cab or fix the cab mounts and push the fender back.


also to get the hood to latch you need to adjust the laches bar left to right & up and down.


and the mount the fire will you can only use two stock holes.

I can run out to my truck and get the measurements if you need, It dose work it just takes a hour or two.